Morphy Richards Bagged cylinder Vacuum - Manual (Page 12)

12
B27 Parking system
For short breaks from work and for storage, simply put the complete vacuuming fittings into the holder
on the back side.
Other Important Information
Dust bags are disposable articles. They must not be used multiple times because
plugged pores reduce the suction power.
To check:
· Attach the floor nozzle. All other nozzles affect the functioning of the change dust bag display.
· Switch on the vacuum cleaner and set the suction power selector (if available) to full suction power.
· Lift the floor nozzle off the floor by a small amount.
· If the dust bag full display is “red”, then you must change the dust bag.
What you should know about how the change dust bag display works.
The display is designed to work with mixed dust, as is mainly found in the home. This includes hair,
carpet fluff, threads, sand, and so on.
However, if you vacuum up a great deal of fine dust, for example drilling dust, sand, plaster, or flour,
the pores of the dust bag will become clogged. Then, the change dust bag display will show “full”, even
if the dust bag is not yet full. The dust bag must then be changed, since the suction power has been
reduced by the plugged pores.
However, if you vacuum up a great deal of hair, carpet or wool fluff, etc., then the change dust bag
display may only respond when the dust bag is already bulging full.
Overheating protection
- Overheating protection (thermo switch) – vacuum cleaner switches off independently
(depending on the configuration)
If the motor switches off independently, you can resume vacuuming after approx. 60 minutes.
In such a case, switch your appliance off (press the ON/OFF button).
- The appliance may switch off automatically if, for example:
- a large object has blocked the suction path
- you continue vacuuming with a full dust bag
- the motor protection filter is very dirty or
- there is a very dirty exhaust filter in the appliance.
· After removing the cause of the problem and waiting for the above-mentioned delay time, the
appliance can be started once again.
UK Helpline 0870 060 2604 Replacement Parts 0870 167 6635 Ireland Helpline 1800 409119