Miele PROFESSIONAL PG 8050I - Manual (Page 47)

Setting the temperature display
The first figure is the number of the
Special function. The second figure
shows whether or not the function is
activated.
40 Actual temperature is displayed
constantly
41 Actual temperature is only
displayed during heating phases
(during program sequences
without heating bars will appear in
the display)
^ Use the "Extra drying" button to set
the actual temperature display.
^ Use the %$ program selection
buttons to select Special function 1 to
5 (
10 or 11 to 50 or 51 in the display).
Saving the settings
^ Press the "Start/Stop" button twice.
The indicator beside the button will
flash.
The programmed setting is now stored
in memory.
^ Turn the dishwasher off with the
"On/Off" button.
Value set:
Programming special functions
47