Mitel 5212/5224 - Manual (Page 39)

-34-
Override
To use Override when you encounter busy or Do Not Disturb tone:
z
Press the Intrude feature key.
Paging
To use Paging:
1. Lift handset.
2. Press the Pager feature key.
3. Dial the Paging zone number (if required).
4. Make the announcement.
Direct Paging
Direct Paging allows you to page a party through the party’s handsfree
speaker. If the paged party has Off-Hook Voice Announce enabled, the page
will be heard even when the party is on a handset or headset call. If the
paged party has Handsfree Answerback enabled and turned on on the
phone, your page automatically establishes a handsfree call with the paged
party.
To page a party:
1. Lift the handset.
2. Press the Direct Paging feature key or dial *37.
3. Dial the extension number.
4. Speak to the dialed party after the tone.
How you answer a Direct Page depends on whether Handsfree Answerback is
enabled and turned on at your phone. See one of the following procedures in
this guide:
z
Direct Paging — Handsfree Answerback Enabled
z
Direct Paging — Handsfree Answerback Disabled