Exit screen – Micronics M54E2 PCI/EISA User Manual
Page 42
Section 4: BIOS Setup Utility
M54E2 System Board Manual
Selecting User (default) will give floppy disk access to both the user and the
supervisor. If the passwords are enabled, this option may only be changed by
the supervisor.
Fixed Disk Boot Sector
This category allows the boot sector of the fixed disk to be write protected.
The default setting is Normal. When set for Write Protect, it serves as a form
of virus protection. If the passwords are enabled, this option may only be
changed by the supervisor.
Exit Screen
After you have completed configuring the BIOS, select the Exit Screen
(Figure 4-9).
Figure 4-9 Exit Screen
Choose “Save Changes and Exit” and reboot the computer. After running the
EISA configuration utility explained in Chapter 5, the computer will be ready
for use.
4-13