Micronics M54E2 PCI/EISA - Manual (Page 11)

M54E2 System Board Manual
Section 1: Introduction
1.4
8. Set the time and date. Adjust the BIOS settings to match your
configuration. If installing an IDE drive, select the IDE device you wish
to configure. Press with Autotype Fixed Disk selected and the
BIOS will automatically configure the drive for you (see Chapter 4).
9. After you have configured the Main Setup menu, make any desired
setting configurations in the Advanced and Security menu. When
finished, go to the exit screen, select “Save Changes and Exit” and you
are finished with the BIOS configuration (Chapter 4).
10. Insert the MCS EISA Configuration Utility into Drive A or Drive B and
type:
A: CF
or
B: CF
Follow the directions to install the necessary drivers for your EISA
peripherals (Chapter 5).