beautypg.com

Motorola 6809494A40-O User Manual

Page 12

background image

10

Battery

Do not attempt to remove the internal rechargeable battery. Disposal of devices that contain
internal rechargeable batteries must be in accordance with local environmental regulations.

Temperature

Do not store or use RAZRWIRE in temperatures lower than -20°C / -4°F or higher

than 50°C / 122°F.

Do not recharge RAZRWIRE in temperatures lower than 0°C / 32°F or higher

than 40°C / 104°F.

Conditions inside a parked car can exceed this temperature range. Do not store

RAZRWIRE in a parked car.

Do not store RAZRWIRE in direct sunlight.
Storing RAZRWIRE fully charged in high temperature conditions may permanently

reduce the life of the internal battery.

Battery life may temporarily shorten in low-temperature conditions.

Shockwave

Do not expose RAZRWIRE to excessive force or impact. Be careful not to drop RAZRWIRE.

Charger

Do not force the charging cable connector into the module port. If the connector won't go into the
port, try flipping the connector 180 degrees. Do not attempt to charge RAZRWIRE with any charger
other than the one designed by Oakley specifically to be used with this product.

Cleaning

To clean the lenses, use the Microclear™ bag that is included with RAZRWIRE, or use a soft cotton
cloth. First, gently brush the cloth across all lens surfaces to remove any grit or particles that might
scratch the lens. Next, gently rub the lenses between the folds of the cloth. When necessary, hand
wash and air-dry the Microclear bag.

When cleaning RAZRWIRE, please note the following:

The transceiver module is not waterproof, and moisture may damage the electronic

circuitry. Do not rinse or immerse any part of the module. Keep the module dry at all times.

Before cleaning, make sure RAZRWIRE is unplugged from the wall charger.
Do not clean the lenses with soaps, detergents, ammonia, alkaline cleaners, abrasive

cleaning compounds or solvents. These substances may damage the lens coatings or leak
into the module and damage the electronic circuitry.

Should a lens become scratched, have it replaced immediately to ensure your vision is not

compromised.