Motorola MBP20 - Manual (Page 16)

16 CLEANING
6. CLEANING
Clean MBP20 with a slightly damp cloth or with an anti-
static cloth. Never use cleaning agents or abrasive
solvents.
Cleaning and care
• Do not clean any part of the product with thinners or
other solvents and chemicals - this may cause
permanent damage to the product which is not covered
by the warranty.
• Keep your MBP20 away from hot, humid areas or
strong sunlight, and do not let it get wet.
• Every effort has been made to ensure high standards of
reliability for your MBP20. However, if something does
go wrong, please do not try to repair it yourself - contact
Customer Service for assistance.
7. TROUBLESHOOTING
Link light on the parent unit does not come on
• Check whether the parent unit is powered on.
• Check whether the supplied battery pack is correctly
installed and that they are not drained.
• Recharge the parent unit by connecting it to the power
supply.
Link light on the parent unit flashes
• The parent unit and the baby unit may be out of range
with each other. Reduce the distance between the units,
but not closer than 5 feet.
• The baby unit may be switched off. Press and hold 0
key to switch on the baby unit.
Low battery light or on the parent unit screen
flashes
• Battery pack in the parent unit is running low. Connect
the parent unit to the mains power with the supplied
power adaptor for recharging.
The parent unit beeps
• Lost connection with the baby unit. Reduce the distance
between the parent unit and the baby unit, but not
closer than 5 feet.
• The baby unit may be switched off. Press and hold 0
key to switch on the baby unit.