Motorola MBP20 - Manual (Page 12)

12 USING YOUR BABY MONITOR
3.4.1 Adjust talk back volume
The baby unit has 5 volume levels from Level 1 to Level 5.
During Talk Back, press
>
or
<
on the baby unit to
increase or decrease the volume respectively.
NOTE
The lullaby will stop playing back when talk back is
activated.
3.5 Temperature
The baby unit constantly monitors the temperature in your
baby's room and alerts you if it gets lower than 14ºC (or
57ºF), screen of parent unit will show the alert message
"Too cold!", or when higher than 39ºC (or 102ºF), will show
"Too hot!". Please check your baby immediately when such
alert message is triggered.
3.6 Lullaby
There are 3 lullabies available for playing to soothe your
baby to sleep.
1. Press
2
on the baby unit key to select the lullaby
and start playing.
2. During playback, press 2 to toggle between different
lullabies.
OR
Press
8
on the baby unit to start playing the selected
lullaby. Press
9
to stop playing.
3.7 Monitoring management for multi-
parent system
The system allows pairing up to two parent units to a baby
unit. However, only one parent unit can receive video
image at a time. You can switch the video feed between
these two parent units.
The first powered up parent unit will connect to the baby
unit automatically, and the next powered up parent unit will
turn up on screen
ANOTHER PU IS VIDEO MONITORING! for around 30
seconds and then goes blank. Press once the
6
to turn
off the screen.