Oil sensor (optional), Function of oil sensor, Restarting – Makita EW220R User Manual
Page 36
8. OIL SENSOR (OPTIONAL)
25
1. FUNCTION OF OIL SENSOR
(EW220R,EW320TR)
The engine will stop automatically when the
oil level falls below the safety limit.
The engine cannot be started unless the
level is raised above the prescribed limit.
2. RESTARTING
(a) Fill the crankcase with oil up to
the proper level.
(b) As for restarting and operating
the engine, refer to section
"4. OPERATION" on page
10.
Check the wire connector from the
engine. It must be connected securely
to the wire from oil sensor.
When selecting the engine oil, refer to
page
7 for the recommended oil.
Oil sensor