Makita EW220R User Manual
Page 29
Cloth or
Paper towel
Oil gauge
(d) Procedures for EW120R
1) Remove the oil gauge. Be cautious to
place the oil gauge in a place where
it will not gather dirt, dust or other
foreign matter.
2) Place a cloth or paper towel to the
area around the oil filler hole.
3) Remove the oil gauge, then tilt the
engine and drain the oil into a pan or
other receptacle.
4) Put the engine on a level surface,
then fill with the oil up to the point of
overflowing the filler neck. Pour the
oil in from a squeeze bottle or other
appropriate.
5) After filling the engine with oil,
reinsert the oil gauge.
Ensure that the oil gauge is tight, as
if it loosens later oil will leak out.
18
ENGLISH
FRANÇAISE
ESPAÑOL