Engine oil, Clean and store – Makita EW220R User Manual
Page 35
24
ENGLISH
FRANÇAISE
ESPAÑOL
4. ENGINE OIL
Change the engine oil with fresh oil.
Remove the spark plug, pour about
5 cc of engine oil into the cylinder,
slowly pull the starter handle of the
recoil starter 2 or 3 times, and reinstall
the spark plug.
5. CLEAN AND STORE
Slowly pull the recoil starter handle
until resistance is felt and leave it in
that position.
Clean the pump thoroughly with an
oiled cloth, put the cover on, and
store the pump indoors in a well
ventilated, low humidity area.
EW220R,EW320TR
Remove the strainer cup, place the
strainer over a container and open the
strainer cock to discharge fuel from
the fuel tank.
Remove the drain screw of the
carburetor float chamber and
discharge fuel.