Remote control functions: special functions, Remote control functions: operation of pip and pop, Activating the pip and pop – MITSUBISHI ELECTRIC ws-55413 User Manual

Page 29

Remote Control Functions: Special Functions

When your remote control has been Programmed to operate another manufacturer’s product, the function

performed on each layer may vary. The most common functions are:

Remote Control Functions: Operation of PIP and POP

Picture-In-Picture (PIP) and Picture-Outside-

Picture (POP) features allow you to view

Programming in different ways. While watching

the main screen, you can display programs from

other channels and other inputs. To see which

inputs can and cannot be used together, see How

Connections Affect the PIP and POP on page .

You can display large and small PIPs, side-by-side

pictures, three POPs, or nine POPs.

Activating the PIP and POP

Press PIP/POP to choose a display format. Each

time the PIP/POP button is pressed on the TV

remote control (within  seconds of each other),

the PIP/POP cycles through the following display

options.

1. POP: side-by-side pictures

2. POP: three POPs

3. POP: nine POPs

4. PIP: large PIP

5. PIP: small PIP

To turn PIP/POP Off, wait at least  seconds,

and press PIP/POP. The next time you activate

PIP/POP, the last used PIP/POP format will be

displayed first.

��

This manual is related to the following products: