Operating instructions (continued) – Memorex MX4122 User Manual

Page 18

OPERATING INSTRUCTIONS (CONTINUED)

With the unit off (in the Standby

mode), press the TIMER/SLEEP

button once, "Timer" will appear

and the hours will blink in the

display.

Press the Tune/Skip/Search n 1

or o 2 button to set the timer on

minute. Press the TIMER/SLEEP

button ❸ and ”CD” or “TU” will

blink.

Press the Tune/Skip/Search n 1 or
o 2

button to set the timer on hour,

then press the TIMER/SLEEP

button ❸ again; the minute digits will

blink. Be sure to observe the AM or

PM indicators to make sure you

have set the hour correctly.

Press the Tune/Skip/Search n 1 or
o 2

button to select the function to

turn on to, “TU” (Tuner) or “CD”.

Press the TIMER/SLEEP button ❸

and the volume level will blink.

Press the Tune/Skip/Search n 1 or
o 2

button to set the desired

volume level to turn on to. Press

the TIMER/SLEEP button ❸ and the

timer will be set. The actual time

and “TIMER” will appear in the

display.

To cancel the Timer Function,

press the Timer/Sleep button

once while in the Standby mode,

"Timer" will disappear from the

display.

When the actual time matches the

timer time, the unit will turn on

automatically and playback the

tracks on the CD or turn on to the

radio (depending on the selection

made in step 4). After 59 minutes,

the unit will turn off automatically.

Press the POWER button 1 to turn

the unit off and the timer will be set

for the next day. Press the

TIMER/SLEEP button 2 to cancel

the timer so that the unit will not be

turned off after 59 minutes.

SETTING THE TIMER

Set the timer to turn the unit on to the Tuner or CD mode at a preset time as follows:

NOTES:

•

Before setting the Timer, make sure there is a disc inside the CD compartment when waking to a CD, or make

sure a AM/FM station is tuned before turning off the unit. Otherwise, there will not be sound when the Timer

on time is reached.

•

If the inserted disc’s total tracks time is shorter than 59 minutes, when the timer is activated, the unit will

playback the tracks on the disc and then stop.

•

Make sure the volume level is adjusted to a suitable level in step 4 above. If the volume setting is too low, you

may not able hear the radio/CD or if the volume setting is too high, the radio/CD sound will be very loud.