Memorex MX4122 - Manual (Page 11)

10
OPERATING INSTRUCTIONS (CONTINUED)
Press the POWER button to turn
the unit on; the Standby indicator
will go out.
1
1
Press the PROGRAM/CLOCK
SET button 1. Press the FOLDER/
MEMORY UP button 2 (on the
main unit) or press the P-
MODE/MEMORY UP or MEMORY
DOWN button (on the remote) until
the desired memory number
appears on the display.
2 1
4
Press the Tune/Skip/Search n 1
or o 2 button to select a station.
1 2
3
Press the FUNCTION button 1 to
select the Tuner mode; the AM or
FM frequency will appear in the
display.
Press the STOP(■)/BAND button
2
to select AM or FM.
1
2
2
Press the PROGRAM/CLOCK
SET button again to set the
station in the selected memory.
1
5
Repeat steps 3 through 5 to
program up to 10 stations in each
band, if desired.
If the main power supply is
interrupted, the memory
presets will be erased.
3 5
6
SETTING RADIO PRESETS
This unit can preset 10 AM and 10 FM radio stations for convenient recall.
Follow steps 1 and 2 above.
1 2
1
Adjust the PRESET EQ button ❶
and VOLUME control ❷ as
desired.
2
1
3
Press the FOLDER/MEMORY UP
button (on the main unit) or press
the P-MODE/MEMORY UP or
MEMORY DOWN button (on the
remote) to select a preset; the
station will automatically be tuned in.
1
2
RECALLING RADIO PRESETS (10 EACH BAND)