Memorex MX4122 - Manual (Page 15)

14
To repeat all files in a
album/folder (MP3/WMA disc
only), press the P-MODE button
1
twice; “REP FOLDER” will
appear in the display. Press the
FOLDER/MEMORY UP button 2
(on the main unit) or FOLDER
UP/DOWN buttons (on the
remote) to select the specific
folder that you wish to repeat.
PLAY/PAUSE (®p) button 3 to
repeat play the album/folder.
4
To repeat all of the tracks on a
disc continuously, while in the
stop mode, press the P-MODE
button ❶ twice (three times if
using an MP3/WMA disc); “REP
ALL” will appear in the display.
Press the PLAY/PAUSE (®p)
button ❷ to begin all tracks
repeating.
1
2
5
To cancel Repeat Playback,
press the P-MODE button until
the mode indicators disappear
from the display.
1
6
Press the FUNCTION button to
select CD; “TOC READ” will
appear in the display.
1
1
Press the PROGRAM/CLOCK
SET button; “00” (track number)
will blink and “P-01” (program
number) and “MEM” will appear in
the display.
If using an MP3/WMA disc, “000”
will appear as the Folder number.
1
3
Press the CD Door Open/Close area on
the main unit to open the CD
compartment. Insert a CD with the label
side facing up. The CD player will read
the table of contents on the disc; the
total number of tracks and total playing
time on the disc will appear in the
display. For MP3/WMA disc, the total
number of folders will appear in the
display as well.
1
2
PROGRAMMED PLAYBACK
The CD player in this unit has a 20 or 10 track programmable memory (20 tracks for standard CD, 10 tracks
for MP3/WMA CD) that allows you to program up to 20 /10 tracks on any disc for playback in any desired order.
You may program 20/10 different tracks or you may also program certain tracks to play more than once.
To perform programmed playback, proceed as follows:
PROGRAMMED PLAYBACK SECTION CONTINUED ON NEXT PAGE.
OPERATING INSTRUCTIONS (CONTINUED)