McIntosh MVP871 - Manual (Page 17)

17
How to use the Remote Control
How to use the Remote Control
The Remote Control is capable of performing both basic
Operating Functions and Setup Options for the MVP871
Disc Player.
Notes: Refer to the “How to Operate” and “How to Operate
Setup Mode” Sections of this manual for additional
information using this Remote Control.
Play
With a disc loaded, press the PLAY push-button to start
the disc playing.
Stop
Press the STOP Push-button once to stop disc playback.
Press PLAY and the disc will start playing again from the
disc time where Stop was pressed. Press STOP twice for
a complete stop and return to the beginning of a disc.
Numbered Push-buttons
Press 1 through 9 to directly access one of the first nine
Disc Tracks/Chapters using the On-screen Icon. For track
numbers greater than 10, press the +10 Push-button first
and then the required number. For example to access Disc
Track/Chapter 23, press +10 twice and then 3.
Clear
Press the CLEAR Push-button to erase a selected track or
incorrect setting.
Pause
Press the PAUSE Push-button to temporarily stop disc
playback at any time. When a DVD is playing, each ad-
ditional time the Pause Push-button is pressed, the player
will proceed to the next Still Video Image.
Note: The Still Video Image step rate may be changed by us-
ing the REV (Reverse) or FF (Fast Forward)

Push-button.
Back and Next
Press the NEXT Push-button to move forward or the
BACK Push-button to move backward one chapter/track
at a time on the disc.
Return
Press the RTRN (Return) Push-button to return to the
previous setup menu.
Setup
Press the SETUP Push-button to access the Initial Setup
Menu.
Subtitle
Press the SUBTITLE Push-button to access the Subtitle
menu and the Subtitle icon will appear at the top of the
screen.
Marker
While a disc is playing, use the MRKR (Marker) Push-
button to establish in memory up to five different starting
points on a disc where you wish play to start.
Angle
If the DVD being played supports the Angle Feature, press
the ANGLE Push-button to select the desired video picture
angle.
Four Direction Arrows
Press an Arrow direction Push-button to move backward,
forward, up or down through an on-screen menu.
Select
Press the SELECT Push-button to confirm and activate a
setup option or options indicated by the on-screen icons.
Note: The SELECT push-button is also referred to as “Re-
turn” when working within the Setup Mode.
Top Menu
When a disc is loaded in the player, press the TOP MENU
Push-button to access the main DVD Title menu (disc
dependent).
Display/Time
Press the DISPlay/TIME Push-button to access vari-
ous disc times, text information on SACD/CD and audio
modes displayed on-screen (disc dependent).
Audio
Press the AUDIO Push-button to access various audio
modes displayed on-screen (disc dependent).
REV and FF
Press a REV (Reverse)

or FF (Fast Forward)

Push-but-
ton to start moving rapidly through a chapter or track on a
disc.
Note: Audio level is automatically muted during this operat-
ing mode with a DVD disc.
A-B Repeat
Press the A-B (Repeat) Push-button once to establish the
starting point of the repeat loop and press the A-B (Repeat)
Push-button a second time for the ending point, and that
segment of a disc to be repeated continuously.