Motorola Ultra Express 6881023B75-A(X) - Manual (Page 6)

4
Setting the Clock and Date
Setting the Clock:
➊ Press and release \ until set time ? is displayed.
➋ Press [ . The hour digits begin to flash.
➌ Press and release \ to set the correct hour digits.
➍ Press [ . The first digit of the minutes begins to flash.
➎ Press and release \ to set the correct minutes.
➏ Press [ again to move to the next minutes digit .
➐ Press [ . The A.M./P.M. indicator begins to flash.
➑ Repeat steps 5 and 6 to set your pager for A.M./P.M.
and the 12/24 hour mode.
➒ Press ] twice or allow the pager to automatically return
to the standby screen. The time and date are displayed.
Note : When adjusting any of the time and date fields, press
and hold the \ to fast-forward to your selection. To skip a
field, press and release [ until you reach the desired field.
For example, if you only need to change the 12 Hour setting,
press and release
\ until set time ? is displayed, then
press and release [ until 1 2 hours begins to flash.
After performing any pager functions described in this
manual, your ULTRA Express pager automatically returns
to the standby mode and your selections are activated; or
press
] twice to return to the standby mode and activate
your selections.
E
11:28a
Example of a set-time screen
1023b75a.fra Page 4 Monday, March 4, 1996 17:50