Maytag MD-1 - Manual (Page 7)

6
Note: Using the Air Fluff temperature setting will
require a longer drying time.
Note: The dial can be turned in either direction to
select a cycle. Once started, the dial will not
advance at a specific rate during the Sensor cycles.
At first the dial may not advance at all. Toward the
end of the cycle (when the load begins to dry), the
dial will advance at a more regular rate and much
more quickly. This is normal operation.
Damp Dry (select models)
Damp Dry is located on the Time Dry/Air Fluff section
of the dial. It is designed to partially dry items and can
be used with any temperature selection. Damp Dry will
provide 20 minutes of tumbling time, followed by
10 minutes of cool-down tumbling.
Time Dry/Air Fluff
This cycle can be used to regulate the drying time. Use
with Air Fluff, Low, Medium or Regular temperature
settings. For timed drying, turn the control dial until the
pointer points to the proper time setting in the Time
Dry/Air Fluff cycle.
STEP 4
Push the Control Dial in
to Start
Push the control dial in to start the dryer. The dryer
door must be closed for the dryer to start.
Cycles and options may vary by model.