Philips Magnavox MDV410 - Manual (Page 10)

10 Hookups (cont’d)
Connecting the DVD Player to a TV only
TV has AUDIO (red and white) and S-VIDEO IN jacks
VIDEO
L/MONO
in
1 AUDIO R
S-VIDEO IN
LEFT AUDIO IN
RIGHT AUDIO IN
R L
AUDIO OUT COAXIAL VIDEO
OUT
Cb S-VIDEO
OUT
Y Cr
DIGITAL AUDIO OUT
PCM/MULTICHANNEL
COMPONENT
VIDEO OUT
1 Connect the supplied red and white audio cables to the red and white
AUDIO OUT jacks on the DVD Player and to the red and white
AUDIO IN jacks on the TV, matching the cable colors to the jack
colors.
2 Connect an S-Video cable (not supplied) to the S-VIDEO OUT jack
on the DVD Player and to the S-VIDEO IN jack on the TV.
3 Connect the TV’s power cord to a power outlet.
Turn on the TV and set it to the S-VIDEO IN channel. This channel may
be near channel 00. See your TV owner’s manual for details.
4 Connect the DVD Player’s power cord to a power outlet.
Press the POWER y
y button to turn on the DVD Player.
You should see the DVD logo on the TV screen. If you do not, check your con-
nections and make sure the TV is on the correct S-Video In channel.
1 2
Back of TV
(example only)
MDV410/430 2/7/02 11:18 AM Page 10