Meyer Sound SIM 3 - Manual (Page 16)

13
sim 3 remote startup Guide
starting siM 3 reMote (windows – all physiCal setups)
Once First Time Setup (see Page 13) is complete the normal startup procedure is as follows:
1. Start Xming
2. Start PuTTY
3. Open the previsously saved session (Load/Open)
4. In the PuTTY terminal window type the following commands (all commands are case sensitive):
Login as: root
5. You will then be asked to type a password, type:
[email protected]’s password: root
The prompt will then change to [root@sim3 root]# as the remote computer logs on to the SIM 3 machine.
6. Under this new prompt type the following command:
[root@sim3 root]# /cf/lsim3.sh
Once you press return you will hear some of the relays on the SIM 3 machine clicking and the normal boot up screen of a
SIM 3 machine will be brought up on the remote computer’s Xming window.
Once the SIM has completed booting you can use the SIM 3 software as if you were using the local keybord and mouse.
Fn keys and keyboard shortcuts will not be functional.
If you want to disconnect from the SIM 3 machine close PuTTY.