Replacing license plate lamp bulbs, Replacing high-mount brake lamp bulbs, Lights – Mazda 2008 Tribute HEV User Manual

Page 56

7. Carefully install the tail lamp assembly on the vehicle and secure

with two screws.

Replacing license plate lamp bulbs

1. Make sure the headlamp switch

is in the OFF position.

2. Depress the lever and carefully

pry the license plate lamp
assembly (located above the
license plate) from the liftgate.

3. Rotate the bulb socket

counterclockwise and remove
from lamp assembly.

4. Pull bulb straight out of socket

and push in the new bulb.

5. Install the bulb socket into the

lamp assembly and rotate
clockwise.

6. To install, carefully press the

lamp assembly into liftgate.

Replacing high-mount brake lamp bulbs

To remove the lamp assembly:

1. Remove the two screws and

move the lamp assembly away
from the liftgate.

2. Remove the bulb holder from

the lamp assembly by
depressing the snaps.

2008 Tribute Hybrid (thv)
Owners Guide (post-2002-fmt)
USA (fus)

Lights