Stowing the jack and tools, Stowing the flat/spare tire, Roadside emergencies – Mazda 2008 Tribute HEV User Manual

Page 219

Text mode
Original mode

Stowing the jack and tools

Make sure the jack is fully lowered
and reclip the tools onto the jack.

Reinstall the jack and tools in the cargo area. To replace the jack in the
vehicle,
• guide the jack bottom first in the

trim opening and position in the
bracket (3),

• secure the retention clip on the

upper part of the jack (2), and

• close the thumbscrew (1).
Make sure the jack is fastened so it
does not rattle when you drive.

Stowing the flat/spare tire

Note:

Failure to follow spare tire stowage instructions may result in

failure of cable or loss of spare tire.

If you are stowing a tire that requires reattaching it to the
vehicle with a tether, perform these steps first, then proceed with
the steps following.

2008 Tribute Hybrid (thv)
Owners Guide (post-2002-fmt)
USA (fus)

Roadside Emergencies

219