Motorola motorola - Manual (Page 6)

19
Message Alarms
This feature allows you to set a one-time or daily alarm for a selected
personal message. You can set an alarm for up to five personal messages.
When a message alarm is set,
b replaces m in the Message-status
screen. At the time the alarm sounds, m is again displayed unless the
alarm is set to alert daily. Press J to display the message for which the
alarm is set. If the alarm times passes without being acknowledged, b
flashes until the message is read.
To Set a One-time Message Alarm
➊ From the Message-status screen, press H or I to select the message
you want to alarm.
➋ Press
K
.
➌ Press I to move the cursor to d .
MESSAGE ALARMS
20
➍ Press
K
. The Set-message-alarm screen is displayed.
The alarm symbol shows the current alarm status. c is displayed if the
message alarm is enabled, e is displayed if the message alarm is
disabled.
➎ Press F or G until c is displayed.
➏ Press I to move the cursor to the hour digits.
Example of Set-Message-Alarm Screen
zv 03:15PM 05/05/7z
z c 1 5:30PM 05/05/97 z
SET ALARM
MESSAGE ALARMS
21
➐ Press F or G to adjust the hour digits.
➑ Repeat steps 6 and 7 to adjust the minutes, AM/PM/24 hr., and date.
➒ Press K to activate your selection.
You can also set a message alarm while reading the message by following
steps 2 through 9 above.
To Set a Daily Message Alarm
➊ Follow steps 1 through 8 to set the message alarm time.
➋ When setting the date in step 8, press G until you see double dashes for
the month, day, and year (--/--/--).
➌ Press K to activate your selection. The alarm is now set to alert every
day at this specified time.
Note: To exit from any screen without making changes, press
J
.
MESSAGE ALARMS
22
Private Time
You can select a time period during which your pager is completely silent.
Your pager still receives messages but is does not alert. The pager alerts
only if an alarm expires or a priority message is received.
To Set Private Time
➊ From the Function menu, press H to move the cursor to 3 .
➋ Press K .
When the Private-time screen is first displayed, the cursor is at the flashing
symbol on the far left,
3 indicates private time is enabled, µ indicates
private time is disabled.
Example of Set Private-Time Screen
ON OFF
3 3:15PM 5:00PM PRIV
A
TE TIME