Appendices, Technical characteristics – MGE UPS Systems 2200 User Manual
Page 25
34007115EN/AA
- Page 25
6. Appendices
Technical characteristics
Output rating
AC-input power
◗
Voltage
◗
Frequency
Output power (operation
on battery power)
◗
Voltage
◗
Frequency
Battery
Environment
◗
Noise level (operation on
AC-input power)
◗
Operating temperature
◗
Relative humidity
Pulsar Evolution 2200
2200 VA / 1540 W
(1)
6 x 12 V, 7 Ah, sealed lead-
acid, maintenance free
Pulsar Evolution 3000 XL
3000 VA / 2000 W
external
(1) Above 184 V on normal utility power. Below this value, the level of output power is lower.
(2) The upper and lower thresholds may be set using the UPS Driver software.
(3) Or 40 Hz in low-sensitivity mode (may be set using the UPS Driver software).
(4) Adjustable from 200 to 240 V using the UPS Driver software.
47 Hz to 70 Hz (50 Hz system) or 56.5 Hz to 70 Hz
(3)
(60 Hz system)
Pulsar Evolution 3000
3000 VA / 2000 W
Single-phase, 160 V to 294 V
(2)
50/60 Hz +/- 0,1 Hz
6 x 12 V, 9 Ah, sealed
lead-acid, maintenance free
<40 dBA
0 to 40
°
C
20 to 90% (without condensation)
Single-phase, 230 V
(4)
(+ 6% / - 10%)