Milan Technology MIL-S1600 - Manual (Page 7)

2.
Hardware Description
Front Panel
The Front Panel of the MIL-S1600 consists of 16 auto-sensing 10/100Base-
TX Ethernet RJ-45 ports, a console port, and an extension slot for a 100Base-
FX Fiber Module. The LED Indicators are also located on the front panel of
the switch.
Figure 2-1. The Front panel of the MIL-S1600
Note : MDI/MDIX allows you to connect to another switch or workstation
without regard to cabling type.
Console Port: The limited management functions are configured
through the Console Port. It requires a direct connection between the
switch and a PC with the provided console cable.
100FX Module ( Optional ) : There are 5 types of one port
100Mbps Fiber Modules available for the MIL-S1600. The connectors for
the 100FX Module are SC, ST, MT-RJ, VF-45 for multi-mode and SC in
single-mode. Using multi-mode fiber cabling the network can be extended
up to 2 kilometers. The distance for extending the network with single-
mode fiber cabling is 15 to 60 kilometers. For more information see
Section 3 on Optional Modules.
4