Morphy Richards VC71067 User Manual

Page 6

Combination floor nozzle

(23)

This nozzle is suitable for general purpose
cleaning on a wide variety of floor coverings.

Turbo nozzle

(28) (certain models only)

This nozzle is suitable for cleaning and
rejuvenating cut pile carpets and is ideal for
picking up stubborn dirt and pet and human hairs.

Cleaning the turbo nozzle

(certain models only)

The turbo nozzle

(28)

should be regularly cleaned

and any hairs or fibres wrapped around the brush
bar removed to maintain optimum performance.

Upholstery nozzle

(25)

This nozzle is ideal for textiles, carpet, upholstery
and stairs etc.

Dusting brush

(26)

This tool is ideal for vacuuming pelmets and
delicate objects and surfaces. This attachment
clips on to the upholstery nozzle

(25)

Crevice tool

(27)

This tool is ideal for awkward places, corners, and
behind radiators etc.

When finished cleaning, switch off the appliance
and remove the plug from the mains supply. Press
and hold the automatic cable rewind button

(8)

until

the power cord

(11)

retracts fully into the machine.

NOTE: Always store the vacuum cleaner base down.

If the cleaner overheats, a motor protection
thermostat will automatically switch the motor
off. If this happens, switch the cleaner off,
unplug from the power supply and leave the
cleaner to cool for at least 60 minutes. Check
the airways for blockages, empty the dust
canister and clean the filters before restarting.

The guarantee may be invalidated if the motor is
damaged due to: using the appliance without
the filters installed; not cleaning the filters; or
not replacing damaged filters.

Cleaning the dust canister filter

(19)

To maintain suction, the dust canister filter must
be cleaned each time the dust canister

(5)

emptied.

Follow steps 1-4 of point 7 of ‘Operating / Assembly’,
page 5.

Access the filter assembly by removing the dust
canister lid

(18)

. Slide the lid release button

(21)

down then rotate the lid anti-clockwise.

Tools and accessories

Storage

Safety cut-out

Maintenance - Filters

Standard accessories

Application

Shelves and hard surfaces

Textiles and upholstery

Carpets and other textile
floor coverings (brushes up
on combination floor nozzle)

Settings for heavy dirt and
smooth floors (brushes down
on combination floor nozzle)

VC71067MUK Rev5_Instruction Book 19/09/2012 13:40 Page 6