Marantz LC1510 - Manual (Page 34)

28
Programming / Erasing channels
1
* This function can be operated only when the set can receive input sig-
nal from broadcasting stations and the antenna cable is connected.
* [Auto programming] function memorizes all the receiving channels of
terestrial TV signals or cable TV programs.
* If channels of general wireless TV and cable TV are duplicated,
press the number buttons (0 ~ 9) to change as
2 Press the volume ( 3 3 ) button.
Scanning channel number
is displayed.
Press the MENU button to select the screen display
as below.
general wireless TV Cable TV
* Press the channel ( 5 5 , ∞ ∞ ) buttons to check the memo-
rized channels after auto programming is finished.
* If you press the ENTER button in auto programming,
the function will stop and only channels programming
up to that time will remain.
* Auto programming function can memorize only the
channels which are being received at that time.
Auto programming channels Auto programming channels
Stop ENTER
3%
Auto Program TV 7
Use 5 5∞ ∞2 2 3 3 And ENTER
Manual Program
Fine
Auto Program