Metabo PE 12-175 - Manual (Page 9)

| 53 | 53
ACCESSORIES FOR DIE GRINDERS
Mounted points
Grit and
grade Shaft Ø
mm Head
Ø and
height
mm Maxi-
mum per-
missible
shaft
length lo
mm Order
no.
Mounted points made of pink aluminium oxide,
shank diameter 6 mm
80 M 6 Ø 20 x 32 14 6.27411
80 M 6 Ø 20 x 32 14 6.27412
80 M 6 Ø 25 x 25 17 6.27413
80 M 6 Ø 20 x 20 20 6.27415
80 M 6 Ø 20 x 32 14 6.27416
80 M 6 Ø 16 x 32 20 6.27417
80 M 6 Ø 10 x 25 20 6.27418
Mounted points made of aluminium oxide,
shank diameter 6 mm
60 O 6 Ø 25 x 32 8 6.27419
60 O 6 Ø 25 x 32 8 6.27420
Small cutting discs for steel
Diameter
x thickness
x bore
mm Maximum
speed
/min Packing
unit Order
no.
Corundum abrasive A 24, for steel
Maximum working speed: 80 m/s
50 x 1,1 x 6 30.600 50 6.30191
50 x 2 x 6 30.600 25 6.30192
50 x 6 x 6 30.600 1 6.30187
76 x 2 x 6 20.800 25 6.30194
76 x 1,1 x 6 20.100 50 6.30195
76 x 2 x 10 20.100 50 6.30199
Order
no.
Mounting arbor for small cutting discs
Shaft Ø: 6 mm
Suitable for machine: G 500, GE 700 6.30189
Router bits
Diameter
mm Usable
length
mm Angle ° Order
no.
Router bits, medium-rough toothed,
shank diameter 6 mm
Suitable for light alloys, copper,
plastics, etc.
HSS straight bit,
rounded off 6.23570
6 10
HSS straight bit 6.23571
6 20
HSS straight bit 6.23572
10 14
HSS dovetail bit 6.23573
12 12 10
HSS chamfering bit 6.23574
10 17 16
Router bits
Diameter
mm Overall
length Usable
length
mm Angle ° Order
no.
Router bits, fine toothed,
shank diameter 6 mm
Suitable for light alloys, copper,
brass, tin, plastics, etc.
HSS router bit,
spherical 6.23575
4,5
HSS router bit,
spherical
6.23576
12
HSS router bit,
tear-shaped
6.23577
12 20
HSS router bit,
conical 6.23578
12 20
HSS dovetail bit 6.23579
12 12 10
HSS router bit,
pear-shaped 6.23580
12 30
HSS straight bit 6.23581
10 14
Flap wheels
Shaft Ø
mm Grit Diameter
x width
mm Maxi-
mum
speed
/min Order
no.
Suitable for die grinder
GE 900 Plus
6 P 60 Ø 50 x 20 15.300 6.31110
6 P 60 Ø 60 x 30 12.700 6.31111
6 P 60 Ø 60 x 40 12.700 6.31112
General accessories
Order
no.
Clamping stand
For clamping the router
motor when working with
the flexible shafts
Locating bore Ø 43 mm
6.27354
Clamp
For the secure fitting
on a work table
6.27107
Flexible shaft
Suitable for speeds of 20,000
to 30 000 rpm
Bearing-mounted at both ends
Equipped with collet for size 6 mm,
6.30714
To drive the flexible shaft 6.27609
using the router's motor unit,
the 8-mm collet on the tool
must be replaced with the 6-mm
collet 6.31945
Length: 1,3 m
Driving shaft: 6 mm
Weight: 0,8 kg
6.27609
Collets for flexible
shaft 27609
Collet bore: 6 mm
6.30714
Collet bore: 3 mm 6.30715
Collet bore: 1/4" (6.35 mm) 6.30716
ANGLE GRINDER
S
MET
AL PR
OCESOR
S
HAMMER
S
IMP
A
C
T DRILLS
DRILLS
SCREWDRIVER
S
W
OOD S
ANDING
MA
CHINES
R
OUTER
S
AND PLANER
S