Insertion and removal of a power supply, Safety disconnect device – Multi-Tech Systems PS9600 User Manual
Page 18
PS9600 Power Supply User Guide
12
CommPlete Communications Server
Insertion and Removal of a Power Supply
Qualified service personnel may insert or remove a power supply without turning off the system. We
recommend that you insert the power supply slowly. If the power supply is not replaced, a cover plate
must be installed.
Safety Disconnect Device
The switches on the power supplies are not safety disconnect devices. To reduce the risk of electric shock,
unplug the two input power cords from the back of the CC9600.
Install the power outlet near the CC9600, and place the equipment so that the outlet is easily accessible.