Microsoft STOREXPRESS DSE4XM1 - Manual (Page 46)

March 10, 2009 Dolphin Interconnect Solutions 46
www.dolphinics.com
ioDimm3 SN:0719 PN:001195011, Mfr:000 Date:20080709
Firmware v11791
92 GBytes, 8192 blocks, 256 pages, 47264 bytes/page (25 pads, 1 plane, 4
banks)
Nand: Samsung (ec) SLC
Error correction: 11 bits per 240 bytes, retire above 4 bits
FPGA ID:000 UID:0000000002cf01326845000048f00c00
PCI: 02:00.0, Slot Number:2 Vendor ID: 1aed Device ID: 1003
Ambient temperature: 40 degC
Internal temperature: avg 44.3 degC, max 50.7 degC
Media status: healthy. 99.78% blocks good. data:99.77% good, md:100%
fct12 Not attached
ioDimm3 SN:0299 PN:001160002, Mfr:AEMS Date:20080724
Firmware v11791
154 GBytes, 8192 blocks, 256 pages, 78848 bytes/page (20 pads, 1 plane, 4
banks)
Nand: Samsung (ec) SLC
Error correction: 11 bits per 240 bytes, retire above 4 bits
FPGA ID:xc5vlx110t-ff1136-1 UID:00000000012b01326854000046cd0801
PCI: 03:00.0, Slot Number:3 Vendor ID: 1aed Device ID: 1001
Ambient temperature: 34 degC
Internal temperature: avg 37.9 degC, max 42.8 degC
Media status: healthy. 99.87% blocks good. data:99.82% good, md:100%
fio-update-iodrive
Description
Updates the ioDrive’s firmware. This utility scans the PCIe bus for all attached ioDrives
and updates up to 256 total devices. Each ioDrive displays a progress bar and
percentage as the update completes. To update one or more specific devices, use the -d
option along with the PCIe bus address to identify which device to update. This utility
requires the device driver be loaded to operate. It also requires a complete power down
of the computer after using fio-update-iodrive to ensure a complete reset and
installation of the firmware.
Caution: The default action (without using the “–d” option) is to upgrade all ioDrive
devices with the updated firmware contained in the
file. Confirm that all
devices need the upgrade prior to running the update. If in doubt, use the –p Pretend
option to view the possible results of the update.
Syntax
fio-update-iodrive <iodrive_version> [-d, -f, -l, -p, -q, -h, -v]
where <iodrive_version> is the path and firmware archive file.