Maytag MAH-1 - Manual (Page 5)

heavy soil – Use for cleaning heavily soiled loads.
normal soil – Use for cleaning moderately soiled loads.
This setting will be appropriate for most loads.
light soil – Use for cleaning lightly soiled loads.
quick – The Quick setting offers a quick cycle time.
Suggested uses include freshening newly purchased clothes,
or clothing that has been packed away.
rinse – Choose this setting to rinse only and then spin.
spin – Spins only.
Step 4
S
ELECT
S
OIL
L
EVEL
/W
ASH
O
PTIONS
Press the appropriate pad to select the Soil Level/Wash
Option.
O
PERATING
I
NSTRUCTIONS
4
Step 5
Press the appropriate pad(s) to select one or more options.
delay wash – Allows the start of any cycle to be delayed for up to 9
hours. Make the appropriate selection for your load, then press the
delay wash pad once for one hour or press the pad again to increase
the delay wash time up to 9 hours in one hour increments.
presoak – Adds 15 minutes of mostly soaking with minimal tumbling
before the regular cycle. Can be selected with any cycle.
stain cycle – Adds time to the wash and rinses for better stain removal.
Automatically provides a fourth rinse.
extra rinse – A fourth rinse at the end of the cycle to more completely
remove laundry additives and perfumes.
max extract (select models) – Use for jeans, towels, and bedding.
Removes more water from loads during spin.
max extract (select models):
longer spin – adds one minute to the spin time.
faster spin – use for jeans, towels and bedding. Removes more
water from loads during spin.
S
ELECT
O
PTIONS
NOTE: To minimize wrinkling of wrinkle free fabrics, the Max Extract
options are not recommended. Do not overload the washer.