Maytag MAH-1 - Manual (Page 12)

11
B
EFORE
Y
OU
C
ALL
CONT
.
• Be sure the door is tightly closed.
• Plug cord into a live electrical outlet.
• Check fuse or reset circuit breaker.
• Press the start/pause pad.
• Turn both faucets on fully.
• Straighten inlet hoses.
• Disconnect hoses and clean screens. Hose filter screens may be plugged.
• Open and close the door, then push the start/pause pad.
• Check fuse or reset circuit breaker.
• Close the door and press the start/pause pad. For your safety, the clothes washer will not
tumble or spin unless the door is closed.
• Press the start/pause pad to stop the machine.
• It may take a few moments for the door lock mechanism to disengage.
• See Cleaning the Interior, page 8.
• Clothes washer should be leveled properly as outlined in installation instructions.
• Check that the leveling leg lock nuts are tightened.
• Be sure rubber feet are installed on leveling legs.
• Weak floors can cause vibration and walking.
• For information on normal operating sounds, see page 13.
For further assistance, call Maytag Customer Assistance toll-free at 1-800-688-9900 USA
or 1-800-688-2002 Canada. U.S. customers using TTY for deaf, hearing impaired or
speech impaired, call 1-800-688-2080.
Door Locked Shut;
Will Not Open
Freshening
Your Washer
Is Noisy
Won’t Fill
Won’t Tumble
C
HECK THESE POINTS IF YOUR
M
AYTAG
® N
EPTUNE
®
WASHER
...