Mantis Pruner E System - Manual (Page 12)

11
GULLET FILING
Approximately every 5th sharpening, clean out gullets
with a 7/32" round file. File gullets from the inside out (the
side opposite from sharpening). Leave a 1/8 inch (3.175 mm)
shelf behind the gullet.
The depth-gauge setting for all square-ground chisel chain is
.025 inch (0.64 mm).
1. Drain the oil tank.
2. Remove sawdust.
3. Lubricate for rust prevention
4. Use chain cover.
5. Store indoor.
Storage