Mitel 5235 - Manual (Page 26)

5235 IP Phone SIP User and Administrator Guide
- 20 -
Add a Party On Hold to a Call in Progress
1. Press (TRANS/CONF). The current call is put on hold.
2. Press the Line key of the party already on hold.
3. Press (TRANS/CONF). The call put on hold in step 1 is connected to the call
in progress.
Leave a Conference Call
Do one of the following:
• Hang
up.
• Press
HANGUP.
• Press (CANCEL).
Note: If any party hangs up, the call remains connected.
Messages - Advisory
An advisory message appears on the display of your phone to inform people calling you
of your whereabouts.
Create an Advisory Message
• Access
the Feature Configuration page of the Web Configuration Tool (see
Accessing the Web Configuration Tool on page 6).
Enable/Disable your Advisory Message
To enable or disable an advisory message:
1. Press Superkey, and then press >> until SETTINGS & OPTIONS? appears.
2. Press OK, and then press Next until ADVISORY MESSAGES? appears.
3. Press OK. The first of several advisory messages appears.
4. Press (UP) or (DOWN) to navigate to the desired message.
5. Press TURNON or TURNOFF to enable or disable the message. When turned on,
the Advisory Message key is lit.
6. Do one of the following:
• To return to the main menu, press EXIT.
• To return to the default display, press Superkey. The advisory message
alternates with the date and time on the default display.
Note: To enable/disable advisory messages using the Web Configuration Tool, access
the tool’s Feature Configuration page (see page 6).