Metz VT 37 TF 31 - Manual (Page 29)

29
Switching on and off
Switching on
If the TV set is cold and is placed in a warm room, wait
for any condensation on the screen to evaporate before
switching the set on.
Switch the TV set on by pressing the main switch.
The TV set is now in standby mode, indicated by a red light.
Single-digit programme positions can be selected with the numeri-
cal keys
ቢ ባ ቤ . . . or with the keys P̅ or P̃ on the remote
control or with the - P + keys on the TV set
When the TV set is on, two-digit programme positions can be selec-
ted by pressing the preselection key for two-digit input, followed by
the numerical keys.
Switching off
Pressing the OFF key on the remote control switches the TV set to
standby mode. Pressing the main switch on the TV set switches the
set off completely.
Displaying the time in TV mode
In order to display the time, first press the
ķ
key twice and then
press the time key once. When the TV set is tuned to a station
which transmits teletext, the time will appear in white figures on a
blue background. Pressing the Time key again switches off the time
display.
Presetting stations
In some cases, the station logos may not be recognised during the
station search. In this case, you can enter the station a logo as
described on page 30.
The various programme positions in the station table can be selec-
ted with the cursor keys.
You can then do the following with the selected programme position:
SELECT = pressing the red key selects this programme position
INSERT = the programme position selected with the red key
can be inserted in another position in the table
DELETE = deletes the programme position
AUTOSTORE = calls the A.P.S. function
• Close the menu by pressing the key. T V
When you switch the TV set on for the first time (with no stations
already stored), the following message is displayed on the screen:
NO SIGNAL
5:00
In this state, the TV set will switch itself off after about five minutes if
you do not press any keys on the remote control.
Now press the key to display the PROGRAM. menu. If you have
switched the TV set on for the first time, the table displayed here is
empty.
Press the blue key on the remote control. The following message is
displayed on the screen:
i
WARNING !
All prestored programmes
will be erased
୵ – ୴ Continue
ń
Cancel
This function can be cancelled by pressing the
ń
key.
The A.P.S. function is started by pressing the ୴ key.
The TV set now searches the entire terrestrial reception range (recei-
ved with an antenna or from cable) for stations.
After the search has been completed, the station table is displayed
on the screen. This could, for example, look like this:
DELETE
INSERT AUTOSTORE
SELECT
PROGRAM.
01 PR01
02 PR02
03 PR03
04 PR04
05 PR05
06 PR06
07 PR07
08 PR08
09 PR09
10 PR10
11 PR11
12 PR12
13 PR13
14 PR14
15 PR15
16
– – – –
17 – – – –
18 – – – –
19 – – – –
20 – – – –
21 – – – –
22 – – – –
23 – – – –
24 – – – –
25 – – – –
26 – – – –
27 – – – –
28 – – – –
29 – – – –
30 – – – –