Measurement Specialties PCI-DIO24 - Manual (Page 10)

PCI-DIO24 User's Guide Installing the PCI-DIO24
10
Connecting the board for I/O operations
Connectors, cables – main I/O connector
The table below lists the board connector type, applicable cables, and compatible accessory products for the
PCI-DIO24.
Board connectors, cables, and accessory equipment
Connector type 37-pin D-type
Compatible cables C37FF-x unshielded ribbon cable. x = length in feet. (see Figure 2)
C37FFS-x cable shielded round cable. x = length in feet. (see Figure 3)
Compatible accessory products
(with the C37FF-x or C37FFS-x cable) SCB-37
CIO-MINI37
CIO-MINI37-VERT
CIO-ERB08
CIO-SERB08
CIO-ERB24
CIO-SPADE50
SSR-RACK08
SSR-RACK24
Pin out – main I/O connector
The I/O connector is a 37-pin, male D-type connector accessible from the rear of the computer through the
expansion backplate. The signals available are direct connections to the digital I/O chips as well as the
computer's internal power supplies. The pin out is identical to the CIO-DIO24, except that –5 VDC is not
brought out. The PCI-DIO24 board's I/O connector is shown in Figure 1.
Figure 1. PCI-DIO24 board connector pin out