Nesco LD 500/500V 15" - Manual (Page 17)

LD 500/500V User Manual
Problem Points to check with possible solutions
Display position is
incorrect Adjust the vertical position or horizontal position from the
OSD menu. (“Image”, “H-pos” or “V-pos”)
If the problem persists, use the graphics board’s utility
software to change the display position if available.
The screen is too bright
or too dark Adjust the contrast and brightness from the OSD menu.
(The backlight of the LCD monitor has a fixed life span.
When the screen becomes dark or begins to flicker, please
contact your dealer)
The Auto adjustment
button does not work
properly The Auto adjustment function is intended for use on
Macintosh and IBM compatibles PCs running Windows. It
may not work properly if either of the following applies.
- You are running MS-DOS on an AT-compatible PC.
- The background color for the “wallpaper” or “desktop”
pattern is set to black.
DDC Plug & Play
This monitor provides Plug & Play capability (VESA DDC 1/2B). To utilize this capability,
your graphic card and hosting system must also be Plug & Play compatible. When properly
set up, the graphic card and hosting system will automatically identify and configure the
monitor, and most importantly, optimize its performance.
- 17 -