Motorola SBV6120 - Manual (Page 3)

GENERAL
Cable Interface 75Ω F-connector
CPE Network Interface 10/100/1000Base-T Ethernet
(RJ-45
Telephony Interface RJ-11 (x2)
Data Protocol TCP/IP, UDP
Telephony Interfaces ETSI harmonized impedance,
600 Ω
Line Mating Line 1= Line 1, or Lines 1 and
2, Line 2 = Line 2
Dimensions 7.3 in x 1.5 in x 6.1 in (18.68 cm
x 3.81 cm x 15.49 cm)
Input Power 100 – 240 VAC, 60 Hz
ENVIRONMENTAL
Operating Temperature 32 °F to 122 °F
(0 °C to 50 °C)
Storage Temperature –22 °F to 176 °F
(–30 °C to 70 °C)
Operating Humidity 5 to 95% R.H.
(non-condensing)
DATA COMPATIBILITY
PC 90496, Pentium, or later;
Windows Vista™, 2000, or XP
or Linux ® with Ethernet
connection (older versions of
Windows, although not
specifically supported, will
work with this cable modem)
Macintosh OS 10 or higher, Ethernet
connection
UNIX Ethernet connection
Home Networking Ethernet router, or wireless
access point with Ethernet
connection
DATA SHEET
SBV6120 SURFboard DOCSIS / Euro-DOCSIS Digital Voice Modem
Specifications
TELEPHONY
Line Type 2-wire
Hook State Signaling Loop start
Maximum Loop Length 1000 ft (AWG 26/0.4 mm @
65 °C)
DTMF Level Sensitivity
Range 0 to –20 dBm
Speech Coding 64 kbps PCM, μ-law or A-law companding;
supports G.711 and low-rate vocoders; T.38 support
Line Termination Configurable based on market needs
Loss Plan Receive (D/A) 4 dB; transmit (A/D) 2 dB (configurable
based on market needs)
Loss Plan Tolerance ±1 dB (one-way)
60/50 Hz Loss >20 dB (referenced to off-hook loss at 1004 Hz)
Ringing Wave Form
Sinusoidal Balanced Tracking mode 55 Vrms/48Vdc
Trapezoidal Balanced Tracking mode 55 Vrms/48Vdc
Sinusoidal Unbalanced Tracking 46 Vrms/70Vdc
Sinusoidal Balanced Fixed mode 55Vrms/48Vdc
Ringing Crest Factor 1.2
Ring Trip (maximum) 200 mS with 300 W termination