Marley Engineered Products C1800 - Manual (Page 4)

OPERATION
1. After the baseboard system has been completely installed, all
thermostats should be turned to LOW or NO HEAT. Then
turn on breakers. Wait 3 to 5 minutes and check to see that
none of the heaters are operating. If operating, disconnect
power and check wiring. If none are operating then turn ther-
mostats to highest position and wait 3 to 5 minutes. Check
to see that all heater(s) are operating. Should any not be
operating, disconnect power and check wiring.
2. Allow entire system to operate steadily for 1/2 hour. This
should remove oily residue from manufacturing. (Some
smoking may occur).
3. Select the setting for comfort on all thermostats.
CLEANING
Because of the convection heating principle which depends on air
circulation through the finned element, dust will collect between
the fins. The heater should be cleaned regularly for maximum
efficiency. Before cleaning be sure the heater is off and the ele-
ment is cool. A vacuum cleaner with a brush attachment may be
used for cleaning. The finish of the heater may be cleaned with a
slightly damp rag if desired.
PAINTING
Painting of this baseboard is not necessary unless to match room
decor. To paint, first rough up the exterior with steel wool. Paint
only the exterior of the cabinet. Do not allow paint on the element
and high limit capillary tube. Use a high quality enamel paint.
LIMITED WARRANTY
All products manufactured by Marley Engineered Products are warrant-
ed against defects in workmanship and materials for one year from date
of installation, except heating elements which are warranted against
defects in workmanship and materials for ten years from date of instal-
lation. This warranty does not apply to damage from accident, misuse,
or alteration; nor where the connected voltage is more than 5% above
the nameplate voltage; nor to equipment improperly installed or wired or
maintained in violation of the product’s installation instructions. All
claims for warranty work must be accompanied by proof of the date of
installation.
The customer shall be responsible for all costs incurred in the removal
or reinstallation of products, including labor costs, and shipping costs
incurred to return products to Marley Engineered Products Service
Center. Within the limitations of this warranty, inoperative units should
be returned to the nearest Marley authorized service center or the
Marley Engineered Products Service Center, and we will repair or
replace, at our option, at no charge to you with return freight paid by
Marley. It is agreed that such repair or replacement is the exclusive rem-
edy available from Marley Engineered Products.
THE ABOVE WARRANTIES ARE IN LIEU OF ALL OTHER WAR-
RANTIES EXPRESSED OR IMPLIED, AND ALL IMPLIED WAR-
RANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICU-
LAR PURPOSE WHICH EXCEED THE AFORESAID EXPRESSED
WARRANTIES ARE HEREBY DISCLAIMED AND EXCLUDED FROM
THIS AGREEMENT. MARLEY ENGINEERED PRODUCTS SHALL
NOT BE LIABLE FOR CONSEQUENTIAL DAMAGES ARISING WITH
RESPECT TO THE PRODUCT, WHETHER BASED UPON NEGLI-
GENCE, TORT, STRICT LIABILITY, OR CONTRACT.
Some states do not allow the exclusion or limitation of incidental or con-
sequential damages, so the above exclusion or limitation may not apply
to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state.
For the address of your nearest authorized service center, contact
Marley Engineered Products in Bennettsville, SC, at 1-800-642-4328.
Merchandise returned to the factory must be accompanied by a return
authorization and service identification tag, both available from Marley
Engineered Products. When requesting return authorization, include all
catalog numbers shown on the products.
HOW TO ORDER REPAIR PARTS
In order to obtain any needed repair or replacement
parts, warranty service or technical information, please
contact Marley Engineered Products Service Center toll-
free by calling 1-800-642-HEAT.
When ordering repair parts, always give the informa-
tion listed as follows:
1. The Part Number
2. The Model Number
3. The Part Description
4. Date of Manufacture
Part No. 5200-2194-007 3-02
4
MODEL NO.
C2570WC
DATE CODE 1294
VOLTS AC 60HZ WATTS AMPS
277/240/208 2500/1900/1450
9.1/8.0/7.0
54E1 LISTED
BASEBOARD HEATER
PATENT PENDING
4104-2109-265
MARLEY ENGINEERED PRODUCTS
BENNETTSVILLE, SC 29512
NAMEPLATE
ECR
35194
EXAMPLE
SPX Corporation
470 Beauty Spot Rd. East
Bennettsville, SC 29512 USA