MITSUBISHI ELECTRIC WS-48515 - Manual (Page 88)

88 89
Appendix G, continued: Diamond Shield™ Installation for
Model WS-73615
The Diamond Shield for the WS-73615 comes in a
separate package. To install:
1. Snap open the molding clips on the right and
left side of the screen. The side closest to the
screen opens. Unsnap the top, bottom and middle,
preferably in that order (the clips are fixed to the TV
and are not detachable). Do not force the clips, they
should open easily.
2. Carefully remove the Diamond Shield from the
protective packaging. Wipe off any dust with a
lint-free cloth. Do not use any cleaners on the
anti-glare Diamond Shield.
3. Insert the shield by sliding it into the bottom channel.
Gently bow the Diamond Shield toward you and
insert the top of the Diamond Shield into the top
channel.
4. Snap the molding clips closed, starting with the top
or bottom. Do not force the clips. This completes
the Diamond Shield installation.
To remove the Diamond Shield, reverse this process.
Step 1. WS-73615 Snapping Open the Molding Clips
Open
molding
clip Closed
molding
clip
Clips are shown
lighter for clarity
������� ���
������� ����
Step 2.WS-73615 Diamond Shield installation
WARNING
Sharp edges! Always wear gloves to
handle, lift, remove and install the
Diamond Shield and molding clips.
For additional assistance, call
(800) 332-2119.