Motorola T5620 User Manual
Page 28

Al
er
ts
26
To transmit to a radio that has QT noise filtering turned on:
1. Select the same channel and Interference Eliminator Code as the other radio.
2. Press
^
to send a call tone. This allows your voice to pass through the QT
noise filter on the receiving radio.
3. Press
M
and speak normally.
Note: If you skip step 2, the beginning of your message may not be heard on
the receiving radio.
For a 30-second period, starting after the last transmission, all transmissions
received on the selected channel and code will pass through the QT noise filter.
1042b60a.book Page 26 Friday, January 17, 2003 2:43 PM