Morphy Richards Steam cleaner - Manual (Page 7)

Attaching tubes & handle
WARNING: Unplug the unit and allow
to cool before fitting or changing
attachments as they become hot during
use.
Attach the desired accessory to the hose
handle, extension tubes can be attached to
the handle for extra reach.
1 Push the extension tubes onto the
connection nozzle as far as it will go until
you hear a click.
Some tasks may be easier with only one,
tube fitted or non at all.
2 To connect the desired accessory
directly to the steam handle, slide the
handle into the accessory head or tube
until it locks in place.
Floor nozzle
The floor nozzle is used for the cleaning
of large, washable wall and floor areas. The
floor nozzle can be used with or without the
cloth cover.
• Sensitive surfaces, wood, linoleum etc.
should be used with the cloth.
IMPORTANT: When steaming sensitive
surfaces including carpets ensure the
brushes on the floor nozzle are retracted.
1 Fit the elbow attachment to the floor
nozzle and twist 1/
2
a turn.
2 Fit the floor nozzle to the extension tube
or handle.
3 To fit the cloth to the floor nozzle pull the
cloth under the clips on both sides. Extra
cloths can be ordered by using our
helpline. Alternatively any strong,
uncoloured cotton cloths may be used.
• For cleaning stubborn dirt on less
sensitive surfaces, the brush fitting can
be extended by turning the dial anti-
clockwise.
7
70530 Rev 4 2/6/04 2:53 PM Page 7