Metra Electronics 99-7878B - Manual (Page 5)

3
99-7878B KIT PREPARATION
KIT PREPARATION
1 Secure the hazard switch into the radio housing panel using the factory hardware.
(Figure A)
2 Secure the air bag light into the radio housing panel using the factory hardware.
(Figure A)
3 Attach the (8) retaining clips to the radio housing panel in the same location as
removed from the factory radio panel. (Figure A)
Continue to kit assembly.
HAZARD
SWITCH
TWO
SCREWS
AIR BAG
SWITCH
TWO
SCREWS
8 RETAINING CLIPS
A