beautypg.com

Plan vent system – Maytag W10099060 User Manual

Page 10

background image

10

4" (10.2 cm) heavy metal exhaust vent and clamps must be
used.

Vent products can be purchased from your dealer or by
calling Maytag Services. For more information, see the
“Assistance or Service” section of this manual.

Rigid metal vent

For best drying performance, rigid metal vents are
recommended.

Rigid metal vent is recommended to avoid crushing and
kinking.

Flexible metal vent

Flexible metal vents are acceptable only if accessible for
cleaning.

Flexible metal vent must be fully extended and supported
when the dryer is in its final location.

Remove excess flexible metal vent to avoid sagging and
kinking that may result in reduced airflow and poor
performance.

Do not install flexible metal vent in enclosed walls, ceilings or
floors.

Elbows

45° elbows provide better airflow than 90° elbows.

Clamps

Use clamps to seal all joints.

Exhaust vent must not be connected or secured with screws
or other fastening devices that extend into the interior of the
duct. Do not use duct tape.

Exhaust

Recommended hood styles are shown here.

The angled hood style (shown here) is acceptable.

An exhaust hood should cap the vent to keep rodents and
insects from entering the home.

Exhaust hood must be at least 12" (30.5 cm) from the ground
or any object that may be in the path of the exhaust (such as
flowers, rocks or bushes, snow line, etc.).

Do not use an exhaust hood with a magnetic latch.

Plan Vent System

Choose your exhaust installation type

Recommended exhaust installations

Typical installations vent the dryer from the rear of the dryer.
Other installations are possible.

4" (10.2 cm) heavy metal exhaust vent

Good

Better

Clamp

4"

10.2 cm

A. Louvered hood style
B. Box hood style

A. Dryer

B. Elbow
C. Wall
D. Exhaust hood

E. Clamps
F. Rigid metal or flexible metal vent

G. Vent length necessary to connect elbows

H. Exhaust outlet

4"
(10.2 cm)

4"
(10.2 cm)

B

A

4"

(10.2 cm)

2½"

(6.4 cm)

Improper venting can cause moisture and lint to collect
indoors, which may result in:

Moisture damage to woodwork, furniture, paint, wallpaper,
carpets, etc.

Housecleaning problems and health problems.

H

G

F

E

D

C

A

B