MITSUBISHI ELECTRIC VS-60609 User Manual
Page 38
MODELS: VS-45609 / VS-50609 / VS-55609 / VS-60609 / VS-60719 / VS-70709
Page 38
Purpose:
Measuring
Instrument
Test Point
Measuring
Range
Input Signal
Ext. Trigger
Input Terminal
Symptom:
[Convergence Circuit]
-----
-----
------
-----
None
Video Input
To Converge red and blue on green.
Color edging at the top, bottom and sides of the picture.
19: Coarse Convergence
CONVERGENCE MODE
Activate ……..MENU-0-1-5-9
Misc. ……………….……"6"
Coarse………………..…."5"
Fine ……………………..."4"
Color (R,G B or DF)...AUDIO
Item No………….…..VIDEO
Adjust/Move……….ADJUST
Cursor Toggle….…..ENTER
Save & Exit…..MENU (twice)
1. Select an External Input (no signal)
2. Enter the Convergence Mode.
3. Select the Coarse Red Function.
4. Set the Adjustments shown below to converge red on the green.
5. Select the Coarse Blue Function
6. Set the Adjustments shown below to converge blue on the green.
7. Exit the Convergence Mode
Note:
If Static Convergence shifts, use HSTA and VSTA to correct convergence at
the center of the screen. (HSTA and VSTA data values must not exceed 200)