Troubleshooting, Tro ubleshooting – Motorola DCT2000 User Manual
Page 31
2 7
TRO UBLESHOOTING
Before calling your service provider, review the troubleshooting guide. This information is to help you quickly solve a problem. If
your problem still exists, contact your service provider.
Problem
Possible Solution
No sound
Press
MUTE
on the remote control to restore the volume level.
Check that the stereo is looking at the proper input source.
Turn your VCR on.
No picture
Check to be sure that all cables are connected properly (hand-tighten if necessary).
If connected through the baseband RCA video connection, make sure the cables are
connected properly.
If you are watching TV using your VCR, be sure your VCR is on.
Picture or sound is noisy on one channel
Reconnect the cable and hang-tighten if loose.
Sound from only one stereo speaker
Hand-tighten or reconnect the cables properly. Be sure wires are not frayed and plugs
are not bent or broken.