beautypg.com

Basic operation, Turning power on and off, Changing channels – Motorola DCT2000 User Manual

Page 20: Adjusting the volume

background image

1 6

BASIC OPERA TI ON

Turning Power On and Off

Press

POWER

on the front panel to turn the DCT 2000 on or off. If using the

remote control, be sure it is in cable mode by pressing

CABLE

, and then press

POWER

.

Changing Channels

You can change channels in two ways:

Press

CHANNEL

▲ or ▼ on the front panel of the DCT 2000, or

press

CHANNEL

+ or - on the remote control to step through the

channel selection.

Enter the number of the channel you want to tune using the numeric
keys on the remote control.

Adjusting the Volume

Press

VOLUME

+ or – on the remote control to adjust the volume. When

you adjust the volume, the volume scale is displayed on the screen.
Press

MUTE

on the remote control to turn the sound off and on again.

For best audio quality, use the remote control to set the DCT 2000 to
approximately ¾ of the maximum volume level and then adjust the audio
levels on the external devices.