Morphy Richards SpillMaster - Manual (Page 5)

55 w ww ww w..m moorrpphhyyrriicchhaarrddss..ccoom m
SAFETY FEATURES
As well as the hose filter, there
are three other main safety
features F which will cut off
suction to the SpillMaster in the
event of improper use:
If the SpillMaster is tilted
backwards, a slug in the nozzle
suction chamber will slide
backwards, blocking the suction
to the hose G.
If the SpillMaster is tilted
sidewards, a slug in the suction
chamber connecting to the
liquid tank will slide upwards,
blocking the suction in the unit
G .
If the SpillMaster is overfilled
with liquid, a float in the liquid
tank will rise upwards, blocking
the suction in the unit.
If any of the above occurs, turn
off your vacuum cleaner
immediately, empty the tank,
reassemble the SpillMaster and
resume use as described in
‘Using the SpillMaster’ section.
EMPTYING THE
SPILLMASTER
Ensure the vacuum cleaner
power is switched off.
Remove the vacuum hose from
the SpillMaster.
Take the SpillMaster to a sink or
drain to empty.
Press down on the tank release
button with one finger H.
With the other hand, rotate the
handle section anti-clockwise as
far as possible H.
Pull upwards to separate the
unit into it’s two parts.
Empty the contents of the
reservoir by tipping it upside
down over a sink or drain I.
F
Before safety
features activate
Safety features
activated
H
I
G
70330 rev1 19/6/08 10:15 Page 5