MITSUBISHI ELECTRIC M557 - Manual (Page 18)

English-14
Unlimited number of Colours
30 kHz to 70 kHz
50 Hz to 120 Hz
640 x 480 @ 60 to 120 Hz
800 x 600 @ 50 to 110 Hz
832 x 624 @ 50 to 106 Hz
1024 x 768 @ 50 to 87 Hz........
1152 x 870 @ 50 to 77 Hz
1280 x 1024 @ 50 to 66 Hz
270 mm
203 mm
AC 100 - 240V, 50 - 60 Hz
360(W) x 368(H) x 382(D) mm
12.2 kg
0 °C to +35 °C
30% to 80%
0 to 3000 m
-20 °C to +60 °C
10% to 90%
0 to 13700 m
1.5 A @ 100 - 240V
Monitor Specifications
Picture Tube Diagonal:
Viewable Image Size:
Radius:
Display Colours Analog input:
Synchronization Range Horizontal:
Vertical:
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area Horizontal:
(Factory setting) Vertical:
Power Supply
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Humidity:
Altitude:
Storage Temperature:
Humidity:
Altitude:
Input Signal Video:
Sync:
Current Rating
Diamond Scan 52
38 cm (15 inch)
36 cm (14 inch)
1080 mm
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Notes
90° deflection,
0.28 mm trio dot pitch,
medium short persistence
phosphor, multi-layered,
anti-static screen coating,
semi-tint screen,
Invar Shadow Mask and
OptiClear screen surface.
Depends on display card
used.
Automatically
Automatically
Some systems may not
support all modes listed.
NEC-Mitsubishi Electronics
Display cites recommended
resolution at 85 Hz for
optimal display performance.
Dependent upon signal
timing used, and does not
include border area.
Specifications
NOTE: Technical specifications are subject to change without notice.
285 mm
215 mm Active Display Area
(Full scan) Dependent upon signal
timing used, and does not
include border area.
01_english 24/5/01, 3:23 pm 14