MITSUBISHI ELECTRIC M557 - Manual (Page 13)

English-9
English
Brightness and Contrast control
To adjust the brightness or contrast, press
the
two keys for brightness or
two keys for contrast, to call up the above
on-screen display.
OSD Function Description
1. Press the key to display the OSD menu.
2. To select a function, press the keys
until the desired function is highlighted.
3. Use the keys to increase or decrease
the parameter level of the setting.
4. Press the key to close the OSD menu.
Colour Temperature
The OSD allow you to select a colour temperature for your monitor.
Press the adjustment buttons to select the desired option. The available
options are 9300, 6500, 5000 and User.
A. If you select the option 9300, 6500 or 5000,
then you will pass over the RGB Gain window
to the next function.
B. If you select the option User, then you will
into the RGB Gain window. From this window
you can make changes to the display's Red,
Green and Blue gain. Press the function select
buttons to scroll through the options; change
values using the adjustment buttons.
01_english 24/5/01, 3:23 pm 9